Ostrich Canvas front bag. Fix to handlebar and carrier. Made in Japan. Wide 260x200x High 220mm, 12.4L, 800g, More info & orderRackTireHeadsetBarplugBellBidonBottlecageBrooks spare partsCranksetDecaleurDerailleurmiscellaneousPanniersToolsGripsCableBasketHubHubdynamoPedalPumpBrakeBrakeleverBrake CablesFenderMudflapMirrorsHandlebarBartapeQuillstemHandlebar BagToeclipstrapToeclipBottombracketRimLightShifterStemFrontrackWheelsSaddlebagSeatpostSaddleBrooks CambiumBrooks saddleBrooksDeal
Products
Ostrich Canvas front bag. Fix to handlebar and carrier. Made in Japan. Wide 260x200x High 220mm, 12.4L, 800g, More info & order
"For urban use, commuting, touring, and light off-roading, the Sabot definitely delivers the goods." - GravelBike.com
Many VO staffers like large pedals, so we wanted to produce a high quality large-platform pedal that would be comfortable even when riding in thin soled shoes. We tested them in minimalist running shoes, leather dress shoes, hiking shoes, and even sandals.
Of course this style of pedal is great for urban riding, but we see other uses, too. More and more bike packers, long distance tourists, and adventure cyclists are riding with big BMX style pedals, and these make a more refined alternative.
The two-sided platform is a CNC-cut aluminum extrusion. It has loads of real estate to eliminate pressure points and all - approximately 100mm wide and 100mm long. There are 12 replaceable traction pins on each side of the pedal to offer great grip even when wet. We include rounded pins with the pedals so as not to damage street shoes, but they are easily replaced with more aggressive sharp pins.
Most existing pedals with large platforms use either loose ball bearings or are designed for BMX or downhill riding and use durable, but stiff, bushings. We designed a chromoly spindle that uses three sealed bearings, two inboard and one outboard. This makes for a very smooth pedal; it feels like a high-end road pedal, and the bearings are easy to replace. Weight is 408g per pair. Uses 6mm hex (Allen wrench) as well as flats (15mm pedal wrench) for easy installation and removal.
Platform size: 100mm x 100mm
Pin style: 12 rounded
Bearings: Sealed cartridge
Weight: 408g per pair
Available in Silver and Noir
Includes reflectors, additional rounded pins, and pin wrench.
Compatible with toe clips and straps
Price is per pair.More info & order
Keep your old French bike on the road!
Sealed, cartridge bearings for simplicity and longevity
Classic square taper design
JIS taper - works with most cranks
Hollow, boron steel axle
Aluminum cups
258g (110mm length)
Spindles are available in a variety of lengths to fit most cranksets
Includes crank bolts
Generally it is the crank model that determines spindle length, so check what spindle length the crank manufacturer recommends or measure your old BB. If between sizes, it's usually wise to choose the longer.More info & order
The VO Campeur Rack is designed for touring and commuting. It features a fully tubular stainless steel design with an upper deck and lower rail system. The lower rail keeps weight low and allows for easy pannier removal, even with the top platform loaded with a tent or dry bag.
Stainless steel construction with a lovely, high polish finish. It won't rust like painted steel racks or fatigue and crack like some aluminum and powder-coated or painted racks.
Long, lower rail helps gets your pannier further back to eliminate heel clipping.
Straight, upper arms securely mount to your bike's seat stay bosses.
There are a pair of eyelets under the top platform for direct mounting to the fender.
A single rear, threaded eyelet is for a light mount.
The top platform is 10 cm wide and 27 cm long. From the top of the rack to the lowest hole is 36.5cm.
The lower tangs feature four sets of holes to fit most bikes with 26", 650b, 700c, and 27" wheels. Simply trim what you don't need or use the bottommost hole for an easy and quick installation.
Maximum weight is 40 lbs.More info & order
More info & order
The VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks).
Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg.
The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages.
The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs.
Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs. You can use our Straight Arms for Campeur Racks, Compression Hardware, and a pair of p-clamps around the rack's tube if you are running super heavy loads and want more stability. You can load it up with 40 lbs of gear if you use this configuration.More info & order
MINOURA Front rack for v-brake-cantilever using an attached quick release. Black pouder paint finition. 1.2kgs, chargeble 10kgs
Low-rider type Front carrier for 700C touring/ Cyclocross or MTB bike with V or cantilever brake
Durable and anti roll design
Steel tube material and black powder paint finish
Fits 26inch to 700C (NOT recommend for suspension forks)
Does not mount to Hub nut axle wheel bikesMore info & order
Decaleurs are traditional quick-release mounts for handlebar bags. Unlike some modern bag mounts, they keep the bag low for better handling and for keeping the handlebars clear. The VO fork mount decaleurs are mounted on the fork's steerer tube either below the headset lock nut or within the spacer stack.
Full stainless steel construction
Available to fit 1" and 1-1/8" forks
Works with most traditional-style bags such as Velo Orange, Acorn, Ostrich, Sologne, Berthoud, TA, LaFuma, and similar
Receiver uses a 3mm thick spacer
Bag Mount uses 6mm posts
Mounting hardware included
Posts are 8 cm forward of the front of the headset ring
Please remember that a decaleur is intended as a quick-release mechanism, not a support for the full weight of the bag; the bag must still rest on a rack or on the fender. Fork mounted decaleurs can be bent slightly to adjust the bag's height, but they might not work with very tall or short frames (for those frames we recommend a front rack with an Integrated Decaleur).
Note: We strongly recommend that you use at least one strap or elastic cord, in addition to the decaleur, to secure your bag to your front rack. If you hit a large bump or pothole, it is possible that your bag could bounce up, detaching the bag from the decaleur receiver.More info & order
The Constructeur Front Rack is a medium sized front rack that attaches to your fork's dropout eyelets. It's simple design is perfect for a handlebar bag, tied-down dry bag, or basket.
All Velo Orange racks are made from polished tubular stainless steel, so they will never rust or flake, and can be re-polished to a mirror shine even after years of use. As with our other racks, there are light mounts on the side of the platform. The height of the rack from the lowest hole on the tang to the bottom of the platform is 37cm. The platform is 20cm long and 10cm wide. The tombstone (backstop) is 9.5cm tall.
There are three holes in the lower tang so that it can be cut to give your bike a real Constructeur-style.
6.8kg maximum weight capacity.
Please note: This rack does not fit suspension forks.More info & order
This is a stainless steel front rack that is perfect for a handlebar bag, tied-down dry bag, or basket.
All Velo Orange racks are made from polished tubular stainless steel, so they will never rust, flake, and can be re-polished to a mirror shine even after years of use. As with our other racks, there are light mounts on the side of the platform. The platform is 20.7 cm long and 10.2 cm wide. The tombstone (backstop) is 9.5 cm tall.
If you plan on getting into offroad exploration, we suggest using a toe strap on the bottom of your bag to ensure it says put over the rough stuff.
If you are getting a custom frame made, we suggest sending the rack to the builder beforehand.
5.4kg max weight capacity.
All mounting hardware is included. Installation instructions found here.
This rack requires the use of cantilever brake bosses. Works best with canti posts that are between 75 and 80 mm wide. Use our Randonneur Front Rack if you don't have cantilever brakes.
More info & order
This is a stainless steel front rack that is perfect for a handlebar bag. The decaleur (bag mount receiver) is integrated into the rack platform. The advantage to this system is: your bag-decaleur-rack combination is more solid, lighter, and less likely to rattle. Integration is the Holy Grail of Constucteur-style bikes, and we feel that these racks are a big step in that direction.
All VO racks are made from polished tubular stainless steel, so they will never rust, flake, and can be re-polished to a mirror shine even after years of use. As with our other racks, there are light mounts on the side of the platform. The platform is 20.5 cm long and 10.2 cm wide.
Most traditional style handlebar bags work perfectly with this rack (any bag around 20cm tall), but very tall bags may need a longer bag mount. If you plan on getting into offroad exploration, we suggest using a toe strap on the bottom of the bag to ensure it says put over the rough stuff.
If you are getting a custom frame made, we suggest sending the rack to the builder beforehand.
This rack requires the use of cantilever brake bosses. Works best with canti posts that are between 75 and 80 mm wide. Use our Randonneur Front Rack with Integrated Decaleur if you don't have cantilever brakes.
12lbs (5.4kg) max weight capacity.
All mounting hardware is includedMore info & order
The Seine Bar is an offroad-worthy riser bar featuring a super comfortable position with loads of real estate and leverage for long days in and out of the saddle.
Straddling the line between touring and full-on MTB, these bars are wide - 780mm to be exact. This width allows you to select climbing lines with ease and navigate bumpy descents without drama. If they're too wide for your trail or your commute, they can still be cut down to really dial in your fit.
The rise is a cool 40mm and sweep is 35°. So while these were mainly designed to satisfy off-road touring enthusiasts' mixed terrain needs, they are an excellent option for commuters and flat-bar gravel connoisseurs alike.
At 205mm in length, the grip area is more than enough for modern sized grips, brake levers, and shifters - and there is still room to cut down if they are too wide from the get-go. The clamp diameter is 31.8mm and the grip diameter is 22.2mm.
Width: 780mm
Sweep: 35°
Grip area: 205mm
Rise/drop: 40mm
Stem clamp diameter: 31.8mm
Grip diameter: 22.2mm
Weight: 443g
Material: Aluminum Alloy
MTB approved
Bead-blast finish in Silver and NoirMore info & order